AS9120B, ISO 9001:2015, and FAA 0056B Accredited

Request an Instant Quote for Part MIL-R-39035 1 of Vishay Thin Film Llc with NSN 5905012262569

Part Number: MIL-R-39035 1

NIIN : 012262569
Alternate P/N: MILR390351

Manufacturer: Vishay Thin Film Llc

CAGE Code : 02111
If you are in need of parts such as MIL-R-39035 1 described as Resistor Variable N from Vishay Thin Film Llc, look no further than ASAP Inventory. As a wholly-owned subsidiary of ASAP Semiconductor, we have access to an inventory of more than two billion new and obsolete parts and components such as MIL-R-39035 1 and many more. ASAP Inventory is an AS9120B, ISO 9001:2015, and FAA AC 00-56B accredited business, and the only independent distributor with a strict No China Sourcing Pledge, guaranteeing that each part you purchase from us is fully traceable or comes directly from the manufacturer. Anything not in our inventory can be tracked down and shipped to you with short lead times and competitive prices through our vast and diverse international supply chain network that spans North America and Europe. MIL-R-39035 1 

PRODUCT DETAILS “*” Required fields are compulsory

CONTACT INFORMATION

   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Note : We Will Not Share Your Information To Any Third Parties.

Our website offers parametric search capabilities allowing our customers to search for parts through a number of filters, one of which is by National Stock Number, or NSN. A National Stock Number is an identifier applied to any item of supply that is repeatedly procured, stocked, stored, issued, and used throughout the federal supply system. ASAP Inventory has a broad selection of NSN parts MIL-R-39035 1 such as 5905012262569 from manufacturers like Vishay Thin Film Llc. To begin the purchasing process immediately, submit an RFQ today.

  • Upload RFQ SHEET
  • If you have more than one item, upload your spreadsheet here

NSN Information for Part Number MIL-R-39035 1 with NSN 5905-01-226-2569, 5905012262569

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-01-226-2569

Item Description:

Resistor Variable N

59050122625690NA
CIICHCCESDPMICCriticalityENAC
UAA
Part NumberISCRNVCRNCCHCCMSDSSADC
Mil-R-39035 1314

Characteristics Data of NSN 5905-01-226-2569, 5905012262569

MRCCriteriaCharacteristic
AEFKMAXIMUM STARTING TORQUE8.00 INCH-OUNCES
AAPNSECTION QUANTITY1
ABTBMOUNTING HOLE DIAMETER0.093 INCHES NOMINAL
ABXFSHAFT LENGTH0.058 INCHES NOMINAL
ADATBODY WIDTH0.190 INCHES NOMINAL
AEDXSHAFT STYLEROUND, SLOTTED
CQCCELECTRICAL RESISTANCE PER SECTION1.000 GALLONS PER MINUTE C AND BETTER FLOORING
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG6120.0 MINIMUM AND 9720.0 MAXIMUM
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-100.0/+100.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0.750 7TH SECONDARY QUALITY
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURECLUTCH
AEDZSHAFT BEARING TYPESLEEVE
AXGYMOUNTING METHODUNTHREADED HOLE
APXHTERMINAL LOCATIONLOWER ADJACENT SIDE TWO ROWS
SR-1DEFINITIVE GOVERNMENT SPEC/STD REFERENCERJR12FY105P
AYQRCENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS0.100 INCHES NOMINAL
ADAQBODY LENGTH1.250 INCHES NOMINAL
TTQYTERMINAL TYPE AND QUANTITY3 PIN
AEFLMAXIMUM RUNNING TORQUE8.00 INCH-OUNCES
AKPVMOUNTING FACILITY QUANTITY2
ABMKOVERALL WIDTH0.190 INCHES NOMINAL
AARHRELIABILITY FAILURE RATE LEVEL IN PERCENT0.100
ABHPOVERALL LENGTH1.308 INCHES NOMINAL
AEFDACTUATOR TYPESINGLE SHAFT
TESTTEST DATA DOCUMENT81349-MIL-R-39035 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTI
AEHTCENTER TO CENTER DISTANCE BETWEEN TERMINALS0.700 INCHES NOMINAL
SR-1MANUFACTURERS CODE81349
ABKWOVERALL HEIGHT0.315 INCHES NOMINAL
ADAUBODY HEIGHT0.315 INCHES NOMINAL
AAQLBODY STYLERECTANGULAR W/MOUNTING HOLES/SLOTS
CSDLSTANDARD TAPER CURVE PER SECTIONA SINGLE SECTION
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION6120.0 MINIMUM AND 9720.0 MAXIMUM
SR-1NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCEMIL-R-39035/1
SR-1SPEC/STD CONTROLLING DATA
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85.0 SINGLE SECTION
AGTPLATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS1.000 INCHES NOMINAL
AARGRELIABILITY INDICATORESTABLISHED
CBMECUBIC MEASURE0.075 CUBIC INCHES
ABWVSHAFT DIAMETER0.115 INCHES NOMINAL
ABJTTERMINAL LENGTH0.500 INCHES NOMINAL
CQCMCENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.300 INCHES NOMINAL
ZZZKSPECIFICATION/STANDARD DATA81349-MIL-R-39035/1 GOVERNMENT SPECIFICATION

  Corresponding National Stock Number to MIL-R-39035 1


Semiconductor's Certifications and Memberships
The only independent
distributor with a
NO CHINA SOURCING Pledge
  • All parts are stocked in the USA.
  • All parts are shipped from the USA.
  • All shipments must comply with U.S.A export laws.
  • No exceptions.
Fallen Heroes Found

“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.

Thank You for Visiting.

We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.